| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 150 GPM | — |
| Max Head | 95 FT | — |
| Power | 5 HP | — |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | — | 470 LPM |
| Max Head | — | 20 M |
| Power | — | 3.7 KW |
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 2″MPT
Outlet: 1-1/2″MPT
- Wet End: Polypropylene (Front Housing, Impeller), Carbon Filled Polypropylene (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Teflon/Ryton/Carbon (Bushing)
- Additional Motor Options: Available in 5HP Explosion Proof, 575V, or Washdown
- Max Internal Pressure: 50 PSI / 3.4bar
- Max Liquid Temperature: 190 °F / 87 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March Series 8 HF 60Hz Pump Curve (opens in new tab)
- March Series 8 HF 50Hz Pump Curve (opens in new tab)
- March Series 8 HF Pump Manual (opens in new tab)
- March Pump General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0157-0108-0100 | TE-8C-MD-HF 3 Phase 5HP with Metal Motor Bracket | Standard |
| 0157-0132-0100 | TE-8C-MD-HF 3 Phase 5HP with Plastic Motor Bracket | Standard |
| The below are modified TE-8C-MD-HF’s | ||
| 0157-0108-0112 | TE-8C-MD-HF 3 Phase 5HP with Metal Motor Bracket | Teflon O-Ring |
| 0157-0108-0130 | TE-8C-MD-HF 3 Phase 5HP with Metal Motor Bracket | Carbon Bushing |
| 0157-0108-0132 | TE-8C-MD-HF 3 Phase 5HP with Metal Motor Bracket | Mica Teflon Bushing |
| 0157-0132-0112 | TE-8C-MD-HF 3 Phase 5HP with Plastic Motor Bracket | Teflon O-Ring |
| 0157-0132-0130 | TE-8C-MD-HF 3 Phase 5HP with Plastic Motor Bracket | Carbon Bushing |
| 0157-0132-0132 | TE-8C-MD-HF 3 Phase 5HP with Plastic Motor Bracket | Mica Teflon Bushing |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0157-0108-0100 | 1 | TE-8C-MD-HF, 3 Phase, Complete Standard Pump | |
| 1 | 0157-0014-1000 | 8 | 1/4″-20 x 1″ Long Screw (Stainless) |
| 2 | 0157-0023-1000 | 8 | 1/4″ ID x 5/8″ OD Washer (Stainless) |
| 3 | 0157-0110-0100 | 1 | Pump Housing Front & Rear (Polypropylene) |
| 4 | 0157-0011-1000 | 1 | 0.157” CS x 7.244” ID “O” Ring (Viton) |
| 5 | 0157-0001-1000 | 1 | Front Thrust Washer (Ceramic) |
| 6 | 0157-0002-1000 | 1 | Shaft (Ceramic) |
| 7 | 0157-0004-0200 | 1 | Impeller with Ryton Bushing (Polypropylene) |
| 8 | 0157-0009-1000 | 1 | Rear Thrust Washer (Ceramic) |
| 9 | 0157-0005-0100 | 1 | Drive Magnet |
| 10 | 0157-0008-0010 | 1 | Motor Bracket (Metal) |
| 11 | 0160-0031-1000 | 4 | 1/2″-13 x 1″ Long Screw (Stainless) |
| 12 | 0160-0032-1000 | 4 | 1/2″ ID x 1-1/4″ OD Washer (Stainless) |
| 13 | 0157-0065-1000 | 1 | Motor, TEFC, 3 Phase, 230/460 V, 50/60 Hz, 5 HP |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 4 | 0157-0032-1000 | 1 | 1/8” CS x 7-1/2” ID “O” Ring (Teflon Encapsulated Viton) |
| 4 | 0157-0058-1000 | 1 | 0.157” CS x 7.244” ID “O” Ring (EPDM) |
| 5 | 0157-0043-1000 | 1 | Front Thrust Washer (Hastelloy C) |
| 6 | 0157-0045-1000 | 1 | Shaft (Hastelloy C) |
| 6 | 0157-0099-1000 | 1 | Shaft, 3 Flats (Ceramic) |
| 6 | 0157-0150-1000 | 1 | Shaft (316 Stainless) |
| 7 | 0157-0004-0500 | 1 | Impeller with Carbon Bushing (Polypropylene) |
| 7 | 0157-0004-0700 | 1 | Impeller with Mica Teflon Bushing (Polypropylene) |
| 8 | 0157-0047-1000 | 1 | Rear Thrust Washer (Hastelloy C) |
| 10 | 0157-0100-1000 | 1 | Motor Bracket (Plastic) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0157-0065-1000 Motor
Conduit Box, TEFC, IP55, VFD Capable
60Hz: 3Ph 5 HP / 3.7 kW, 230/460V, 11.8/5.9AMPS, 3450 RPM (Usable at 208V)
50Hz: 3Ph 5 HP / 3.7 kW, 380V, 7.14AMPS, 2850 RPM (Usable at 190/220V)
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the TE-8C-MD-HF Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.
Great for Chemicals Including
The TE-8C-MD-HF has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-8C-MD-HF may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-8C-MD-HF. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial TE-8C-MD-HF is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 150 gallons per minute at 15 feet, and its maximum head is 95 Feet (41PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Polypropylene, Viton, Teflon/Ryton/Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1-1/2 inch male pipe thread. The standard motor is a 3 Phase 60 hertz 208/230/460 and 50 hertz 190/220/380V 5 horsepower totally enclosed fan cooled motor. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-8C-MD-HF centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-8C-MD-HF is suitable for your application, please contact March Pump.
