| System | US | Metric |
| Max Flow | 18 GPM | 68 LPM |
| Max Head | 50 FT | 15.2 M |
| Power | 0.125 HP | 0.093 KW |
Electrical/Air: 60PSI and 7CFM
Inlet: 1″FPT
Outlet: 1/2″MPT
- Wet End: 316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
- Max Internal Pressure: 200 PSI / 13.7 bar
- Max Liquid Temperature: 250 °F / 121 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March TE 5-AM Pump Curve (opens in new tab)
- Pumps with Air Motors Manual (opens in new tab)
- March Pump General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
0150-0120-0500, TE-5S-MD-AM
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0150-0120-0500 | 1 | TE-5S-MD-AM Complete Standard Pump | |
| 1 | 0150-0021-1000 | 7 | #8-32 x 1-3/4” Long Screw (Stainless) |
| 2 | 0150-0111-0010 | 1 | Cover with 1” FPT Inlet (316 Stainless) |
| 3 | 0750-0986-1000 | 1 | 0.078” CS x 2.834” ID “O” Ring (Viton) |
| 4 | 0130-0028-1000 | 1 | Thrust Washer (Ceramic) |
| 5 | 0130-0024-1000 | 1 | Shaft (Ceramic) |
| 6 | 0150-0114-0400 | 1 | Encapsulated Impeller with Carbon Bushing (316 Stainless) |
| 7 | 0150-0110-0010 | 1 | Rear Housing with 1/2″ MPT Outlet (316 Stainless) |
| 8 | 0151-0061-0200 | 1 | Drive Magnet |
| 9 | 0145-0010-1000 | 1 | Motor Bracket (Plastic) |
| 10 | 0115-0023-1000 | 4 | #8-32 x 1-1/8″ Long Screw |
| 11 | 0858-0004-1000 | 4 | #8 Washer |
| 12 | 0986-0001-0100 | 1 | Connecting Bracket |
| 13 | 0210-0038-1000 | 2 | #8-32 Set Screw |
| 14 | 0125-0106-1000 | 1 | Base |
| 15 | 0858-0003-1000 | 4 | #8 Split Lock Washer |
| 16 | 0410-0039-1000 | 4 | #8 Nut |
| 17 | 0986-0002-1000 | 1 | Air Motor |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 3 | 0750-0987-1000 | 1 | 0.078″ CS x 2.834″ ID “O” Ring (Buna N) |
| 3 | 0150-0212-1000 | 1 | 0.078″ CS x 2.893″ ID “O” Ring (Teflon Encapsulated Viton) |
| 3 | 0750-0053-1000 | 1 | 0.078″ CS x 2.834″ ID “O” Ring (EPDM) |
| 5 | 0130-0147-1000 | 1 | Shaft, 3 Flats (Ceramic) |
| 5 | 0939-0003-1000 | 1 | Shaft (316 Stainless) |
| 6 | 0150-0114-0600 | 1 | Impeller with Mica Teflon Bushing (316 Stainless) |
| 6 | 0150-0098-0200 | 1 | Impeller (Polypropylene) |
| 6 | 0150-0098-0300 | 1 | Impeller with Carbon Bushing (Polypropylene) |
| 6 | 0150-0098-0500 | 1 | Impeller with Mica Teflon Bushing (Polypropylene) |
| 6 | 0150-0125-0200 | 1 | Impeller (Kynar) |
| 6 | 0150-0125-0300 | 1 | Impeller with Carbon Bushing (Kynar) |
| 6 | 0150-0125-0500 | 1 | Impeller with Mica Teflon Bushing (Kynar) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) | |
| Flanges (Not Shown) |
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0986-0002-1000 Motor
0.125HP/0.093kW, 60PSI and 7CFM, 1/8″NPT Air Connection
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the TE-5S-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, small scrubbers, detergent mixers, and carbon arc furnace cooling.
Great for Chemicals Including
The TE-5S-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-5S-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-5S-MD-AM. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial TE-5S-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 18 gallons per minute at 1 foot, and its maximum head is 50 Feet (21PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a .125 Horsepower compressed air motor which requires 60PSI. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5S-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5S-MD-AM is suitable for your application, please contact March Pump.
