Name: 815-BR-C Magnetic Drive Pump
Brand: MARCH

Unit	60Hz
System	US	Metric
Max Flow	8 GPM	30.3 LPM
Max Head	18.6 FT	5.7 M
Power	0.04 HP	0.029 KW

Unit	50Hz
System	US	Metric
Max Flow	7.9 GPM	30 LPM
Max Head	13.5 FT	4.1 M
Power	0.04 HP	0.029 KW

Electrical/Air: 115V 50/60Hz or 230V 50/60Hz

Inlet: 3/4″MPT

Outlet: 1/2″MPT

Wet End: Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 150 PSI / 10.3 bar
Max Liquid Temperature: 250 °F / 121 °C
Note: Product image may be different than actual product received.

Pump Curves & General Installation Sheets

Part Numbers

P/N	Pump Description	Modified With
0809-0017-0400	815-BR-C 115V	Standard
0809-0017-0500	815-BR-C 230V	Standard
	The below are modified 815-BR-C’s

Parts Breakdown

Item	Part Number	Qty	Description
	0809-0017-0400	1	815-BR-C, 1 Phase, 115V, Complete Standard Pump
	0809-0017-0500	1	815-BR-C, 1 Phase, 230V, Complete Standard Pump
1	0923-0003-1000	4	#8-32 x 1″ Long Housing Screw (Steel)
2	0809-0142-0000	1	Pump Housing with Center Inlet (Bronze)
3	0809-0165-1000	1	0.070″ CS x 2.441″ ID “O” Ring (Silicone)
4	0809-0043-1000	1	Thrust Washer (Teflon)
5	0809-0214-1000	1	Left Hand Thread Shaft (Stainless) Check shaft type before ordering replacement parts.
6	0809-0107-0200	1	2-5/32″ Diameter Impeller (Ryton/Teflon/Glass)
7	0809-0012-1000	1	Rear Housing (Stainless)
8	0135-0040-1000	4	#8-32 x 3/8″ Long Rear Housing Screw (Stainless)
9	0125-0083-0100	1	Drive Magnet
10	0135-0040-1000	4	#8-32 x 3/8″ Long Screw (Stainless)
11	0858-0004-1000	4	#8 Washer (Stainless)
12	0809-0058-1000	1	Motor Bracket (Plastic)
13	0809-0218-1000	1	Motor, 1 Phase, 115V, 50/60 Hz
13	0809-0124-1000	1	Motor, 1 Phase, 230V, 50/60 Hz

Options

Item	Part Number	Qty	Description
	0750-1011-1000	1	Stainless Steel Tag w/Customer’s Desired Information (Not Shown)

Dimensional Drawings

Please Contact us for 3D drawings and drawings of pumps with alternative motors.

Motor Information

0809-0218-1000 Motor
6 Foot Cord and Plug
60Hz: 1Ph 115V 0.04HP / 0.029kW, 0.5 AMPS, 3450 RPM
50Hz: 1Ph 115V 0.04HP / 0.029kW, 0.4 AMPS, 2850 RPM

0809-0124-1000 Motor
3 Foot Cord
60Hz: 1Ph 230V 0.04HP / 0.029kW, 0.3 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.04HP / 0.029kW, 0.3 AMPS, 2850 RPM

Please contact us for alternative motor data

Perfect for Applications Including

Applications for the 815-BR-C Magnetic Drive Pump include hot water systems and solar heating.

Great for Chemicals Including

The 815-BR-C has pumped Cutting Oils, Ethylene Glycol, Hot Water and Salt Water. The 815-BR-C may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 815-BR-C. Chemical Resistance Chart (öffnet in neuem Tab)

March Pump’s industrial 815-BR-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-BR-C is suitable for your application, please contact March Pump.

815-BR-C Magnetic Drive Pump

Details