| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 8 GPM | 30.3 LPM |
| Max Head | 18.6 FT | 5.7 M |
| Power | 0.04 HP | 0.029 KW |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 7.9 GPM | 30 LPM |
| Max Head | 13.5 FT | 4.1 M |
| Power | 0.04 HP | 0.029 KW |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/4″MPT
Outlet: 1/2″MPT
- Wet End: Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
- Max Internal Pressure: 150 PSI / 10.3 bar
- Max Liquid Temperature: 250 °F / 121 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- 815-BR-C Performance Curve (opens in new tab)
- March Series 815-C Pump Manual (opens in new tab)
- March Pump General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0809-0017-0400 | 815-BR-C 115V | Standard |
| 0809-0017-0500 | 815-BR-C 230V | Standard |
| The below are modified 815-BR-C’s |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0809-0017-0400 | 1 | 815-BR-C, 1 Phase, 115V, Complete Standard Pump | |
| 0809-0017-0500 | 1 | 815-BR-C, 1 Phase, 230V, Complete Standard Pump | |
| 1 | 0923-0003-1000 | 4 | #8-32 x 1″ Long Housing Screw (Steel) |
| 2 | 0809-0142-0000 | 1 | Pump Housing with Center Inlet (Bronze) |
| 3 | 0809-0165-1000 | 1 | 0.070″ CS x 2.441″ ID “O” Ring (Silicone) |
| 4 | 0809-0043-1000 | 1 | Thrust Washer (Teflon) |
| 5 | 0809-0214-1000 | 1 | Left Hand Thread Shaft (Stainless) Check shaft type before ordering replacement parts. |
| 6 | 0809-0107-0200 | 1 | 2-5/32″ Diameter Impeller (Ryton/Teflon/Glass) |
| 7 | 0809-0012-1000 | 1 | Rear Housing (Stainless) |
| 8 | 0135-0040-1000 | 4 | #8-32 x 3/8″ Long Rear Housing Screw (Stainless) |
| 9 | 0125-0083-0100 | 1 | Drive Magnet |
| 10 | 0135-0040-1000 | 4 | #8-32 x 3/8″ Long Screw (Stainless) |
| 11 | 0858-0004-1000 | 4 | #8 Washer (Stainless) |
| 12 | 0809-0058-1000 | 1 | Motor Bracket (Plastic) |
| 13 | 0809-0218-1000 | 1 | Motor, 1 Phase, 115V, 50/60 Hz |
| 13 | 0809-0124-1000 | 1 | Motor, 1 Phase, 230V, 50/60 Hz |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
- Dimensional Drawing 815-BR-C 115V (opens in new tab)
- Dimensional Drawing 815-BR-C 230V (opens in new tab)
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0809-0218-1000 Motor
6 Foot Cord and Plug
60Hz: 1Ph 115V 0.04HP / 0.029kW, 0.5 AMPS, 3450 RPM
50Hz: 1Ph 115V 0.04HP / 0.029kW, 0.4 AMPS, 2850 RPM
0809-0124-1000 Motor
3 Foot Cord
60Hz: 1Ph 230V 0.04HP / 0.029kW, 0.3 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.04HP / 0.029kW, 0.3 AMPS, 2850 RPM
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the 815-BR-C Magnetic Drive Pump include hot water systems and solar heating.
Great for Chemicals Including
The 815-BR-C has pumped Cutting Oils, Ethylene Glycol, Hot Water and Salt Water. The 815-BR-C may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 815-BR-C. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial 815-BR-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.75 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-BR-C is suitable for your application, please contact March Pump.
