| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 38 GPM | 144 LPM |
| Max Head | 49 FT | 15 M |
| Power | 0.5 HP | 0.372 KW |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 30 GPM | 113.5 LPM |
| Max Head | 36 FT | 11 M |
| Power | 0.375 HP | 0.279 KW |
Electrical/Air: 1Ph 115/230V 60Hz & 115/230V 50Hz or 3Ph 230/460V 60Hz & 230/460V 50Hz, or 3Ph 575V 60Hz
Inlet: 1″FPT
Outlet: 3/4″MPT
- Wet End: Polypropylene (Impeller, Front Housing, Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Ryton/Teflon/Carbon (Bushing)
- Additional Motor Options: Available in 1HP Explosion Proof and Washdown
- Max Internal Pressure: 50 PSI / 3.4 bar
- Max Liquid Temperature: 190 °F / 87 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March TE-6 60Hz Pump Curve (öffnet in neuem Tab)
- March TE-6 50Hz Pump Curve (öffnet in neuem Tab)
- March TE-6 Pump Manual (öffnet in neuem Tab)
- March Pump General Installation Guide (öffnet in neuem Tab)
- March Safety Instructions and Preventive Maintenance Guide (öffnet in neuem Tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0153-0095-0100 | TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket | Standard |
| 0153-0095-0200 | TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket | Standard |
| 0153-0095-0300 | TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket | Standard |
| The below are modified TE-6P-MD’s with Metal Motor Brackets | ||
| 0153-0095-0112 | TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket | Teflon O-Ring |
| 0153-0095-0212 | TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket | Teflon O-Ring |
| 0153-0095-0312 | TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket | Teflon O-Ring |
| 0153-0095-0130 | TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket | Carbon Bushing |
| 0153-0095-0230 | TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket | Carbon Bushing |
| 0153-0095-0330 | TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket | Carbon Bushing |
| 0153-0095-0132 | TE-6P-MD 1 Phase 0.5HP with Metal Motor Bracket | Mica Teflon Bushing |
| 0153-0095-0232 | TE-6P-MD 3 Phase 0.5HP with Metal Motor Bracket | Mica Teflon Bushing |
| 0153-0095-0332 | TE-6P-MD 3 Phase 575V 0.5HP with Metal Motor Bracket | Mica Teflon Bushing |
| P/N | Pump Description | Modified With |
|---|---|---|
| 0153-0116-0100 | TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket | Standard |
| 0153-0117-0100 | TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket | Standard |
| The below are modified TE-6P-MD’s with Plastic Motor Brackets | ||
| 0153-0116-0112 | TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket | Teflon O-Ring |
| 0153-0117-0212 | TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket | Teflon O-Ring |
| 0153-0116-0130 | TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket | Carbon Bushing |
| 0153-0117-0230 | TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket | Carbon Bushing |
| 0153-0116-0132 | TE-6P-MD 1 Phase 0.5HP with Plastic Motor Bracket | Mica Teflon Bushing |
| 0153-0117-0232 | TE-6P-MD 3 Phase 0.5HP with Plastic Motor Bracket | Mica Teflon Bushing |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0153-0095-0100 | 1 | TE-6P-MD, 1 Phase, Complete Standard Pump | |
| 0153-0095-0200 | 1 | TE-6P-MD, 3 Phase, Complete Standard Pump | |
| 1 | 0153-0064-1000 | 6 | 1/4″-20 x 1-3/4″ Long Screw (Stainless) |
| 2 | 0155-0021-1000 | 6 | 1/4″ ID x 1/2″ OD Washer (Stainless) |
| 3 | 0153-0052-1000 | 1 | Front Housing with 1” FPT Inlet & 3/4″ MPT Outlet (Polypropylene) |
| 4 | 0153-0015-1000 | 1 | 3/32″ CS x 4-7/16” ID “O” Ring (Viton) |
| 5 | 0155-0009-1000 | 1 | Thrust Washer (Ceramic) |
| 6 | 0153-0007-1000 | 1 | Shaft (Ceramic) |
| 7 | 0153-0003-0400 | 1 | Impeller with Ryton/Teflon/Carbon Bushing (Polypropylene) |
| 8 | 0153-0072-0100 | 1 | Rear Housing with Ceramic Thrust Washer (Polypropylene) |
| 9 | 0153-0035-0100 | 1 | Drive Magnet |
| 10 | 0153-0093-0010 | 1 | Motor Bracket (Aluminum) |
| 11 | 0155-0017-1000 | 4 | 3/8-16 x 3/4″ Long Screw (Stainless) |
| 12 | 0155-0019-1000 | 4 | 3/8″ ID x 5/8″ OD Washer (Stainless) |
| 13 | 0153-0019-1000 | 1 | Motor, TEFC, 1 Phase, 115/230V, 50/60 Hz |
| 14 | 0153-0020-1000 | 1 | Motor, TEFC, 3 Phase, 230/460V 50/60 Hz |
| WEK | 0153-0096-0100 | 1 | Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7, 8) |
| PLM | 0153-0099-0100 | 1 | Pump Less Motor (Items: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 4 | 0153-0025-1000 | 1 | 3/32″ CS x 4-7/16” ID “O” Ring (EPDM) |
| 4 | 0153-0107-1000 | 1 | 3/32″ CS x 4-7/16″ ID “O” Ring (Teflon) |
| 5 | 0155-0084-1000 | 1 | Thrust Washer (Hastelloy “C”) |
| 5 | 0155-0149-1000 | 1 | Thrust Washer (Silicon Carbide) |
| 5 | 0155-0233-1000 | 1 | Thrust Washer (Zirconium) |
| 6 | 0153-0073-1000 | 1 | Shaft, 3 Flats (Ceramic) |
| 7 | 0153-0003-0500 | 1 | Impeller with Carbon Bushing (Polypropylene) |
| 7 | 0153-0003-0900 | 1 | Impeller with Mica Teflon Bushing (Polypropylene) |
| 10 | 0153-0001-0100 | 1 | Motor Bracket (Ryton) |
| 0155-0059-1000 | 1 | Motor, Explosion Proof, 1 Phase (Contact March For Additional Specs) | |
| 0155-0060-1000 | 1 | Motor, Explosion Proof, 3 Phase (Contact March For Additional Specs) | |
| 1 | Motor, Washdown, 1 Phase (Contact March For Additional Specs) | ||
| 1 | Motor, Washdown, 3 Phase (Contact March for Additional Specs) | ||
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) | |
| Flanges (Not Shown) |
Dimensional Drawings
- Dimensional Drawing TE-6P-MD 1Ph (öffnet in neuem Tab)
- Dimensional Drawing TE-6P-MD 3Ph (öffnet in neuem Tab)
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0153-0019-1000 Motor
Conduit Box, TEFC, IP43
60Hz: 1Ph 0.5HP / 0.37kW, 115/230V, 7.4/3.7 AMPS, 3450RPM (Usable at 208V)
50Hz: 1Ph 0.375HP/ 0.28kW, 115/230V, 8.4/4.2 AMPS, 2850RPM
0153-0020-1000 Motor
Conduit Box, TEFC. IP43, VFD Capable
60Hz: 1Ph 0.5HP / 0.37kW, 230/460V, 1.5/0.75 AMPS, 3450RPM (Usable at 208V and 415V)
50Hz: 1Ph 0.5HP / 0.37kW, 230/460V, 1.7/0.85 AMPS, 2850RPM (Usable at 415V)
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the TE-6P-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-6P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-6P-MD may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-6P-MD. Chemical Resistance Chart (öffnet in neuem Tab)
March Pump’s industrial TE-6P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 38 gallons per minute at 10 feet, and its maximum head is 49 Feet (21PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 115/230V 0.5 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 230/460V 0.5 horsepower totally enclosed fan cooled motor. There are performance differences between the hert options. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-6P-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-6P-MD is suitable for your application, please contact March Pump.
