| System | US | Metric |
| Max Flow | 40 GPM | 151 LPM |
| Max Head | 65 FT | 19.8 M |
| Power | 0.95 HP | 0.708 KW |
Electrical/Air: 95PSI and 30 CFM
Inlet: 1-1/2″MPT
Outlet: 1″MPT
Capable of a Maximum Suction Lift of 16 Feet
- Wet End: Glass Filled Kynar (Impeller, Housings), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
- Max Internal Pressure: 40 PSI / 2.7 bar
- Max Liquid Temperature: 180 °F / 82 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March SP-TE-7-MD-AM Curve (öffnet in neuem Tab)
- Manual for 2AM and 8AM Air Motor (öffnet in neuem Tab)
- March Pump Self Priming General Installation Guide (öffnet in neuem Tab)
- March Safety Instructions and Preventive Maintenance Guide (öffnet in neuem Tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0155-0333-0100 | SP-TE-7K-MD-AM | Standard |
| The below are modified SP-TE-7K-MD-AM’s | ||
| 0155-0333-0132 | SP-TE-7K-MD-AM | Mica Teflon Bushing |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0155-0333-0100 | 1 | SP-TE-7K-MD-AM | |
| 1 | 0155-0196-1000 | 1 | Housing Container (Kynar) |
| 2 | 0155-0197-1000 | 2 | Drain & Filler Cap (Kynar) |
| 3 | 0155-0179-1000 | 1 | 1/8″ CS x 2″ OD “O” Ring (Viton) |
| 4 | 0155-0183-1000 | 1 | V-Retainer Clamp (Stainless) |
| 5 | 0155-0195-1000 | 1 | Front Housing (Kynar) |
| 6 | 0155-0180-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (Viton) |
| 7 | 0155-0009-1000 | 1 | Thrust Washer (Ceramic) |
| 8 | 0155-0039-1000 | 1 | Shaft (Ceramic) |
| 9 | 0155-0160-0200 | 1 | Impeller with Carbon Bushing (Kynar) |
| 10 | 0155-0181-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (Viton) |
| 11 | 0155-0194-0100 | 1 | Rear Housing with Ceramic Thrust Washer (Kynar) |
| 12 | 0155-0017-1000 | 2 | 3/8″-16 x 3/4″ Long Screw (Stainless) |
| 13 | 0155-0335-1000 | 2 | 3/8″-16 x 2″ Long Screw (Stainless) |
| 14 | 0155-0019-1000 | 6 | 3/8″ ID x 5/8″ OD Washer (Stainless) |
| 15 | 0155-0178-1000 | 1 | Motor Bracket (Plastic) |
| 16 | 0155-0130-0200 | 1 | Drive Magnet |
| 17 | 0155-0257-1000 | 1 | Air Motor |
| 18 | 0155-0260-0000 | 1 | Motor Support Bracket (Aluminum) |
| 19 | 0155-0334-1000 | 4 | 3/8″ Hex Nut (Stainless) |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 3 | 0155-0214-1000 | 1 | 1/8″ CX x 2″ OD “O” Ring (Teflon Encapsulated Viton) |
| 3 | 0155-0273-1000 | 1 | 1/8″ CX x 2″ OD “O” Ring (EPDM) |
| 6 | 0155-0215-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (Teflon Encapsulated Viton) |
| 6 | 0155-0274-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (EPDM) |
| 9 | 0155-0160-0400 | 1 | Impeller with Mica Teflon Bushing (Kynar) |
| 9 | 0155-0160-0500 | 1 | Impeller w/Teflon/Ryton/Carbon Bushing (Glass Filled Kynar) |
| 10 | 0155-0219-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (Aflas) |
| 10 | 0155-0275-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (EPDM) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Motor Information
0155-0257-1000 Motor
0.95HP/0.708kW, 100PSI and 30CFM, 1/4″NPT Air Connection
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the SP-TE-7K-MD-AM Magnetic Drive Self Priming Pump include chemical recirculation, chemical transfer, and scrubber systems. They are ideal for non ported tanks and siphon feed tanks.
Great for Chemicals Including
The SP-TE-7K-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The SP-TE-7K-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the SP-TE-7K-MD-AM. Chemical Resistance Chart (öffnet in neuem Tab)
March Pump’s industrial SP-TE-7K-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 40 gallons per minute at 12 feet, and its maximum head is 65 Feet (28PSI). When the SP-TE-7K-MD-AM is fully primed, it is capable of having a suction life of 16 feet in 120 seconds. The maximum lift or equivalent is 21 feet. The standard wet end (the materials that come into contact with the solution) is composed of glass filled Kynar, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch male pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a Compressed Air Motor which may require 95PSI and 30CFM. The maximum internal pressure the pump can tolerate is 40PSI, and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius. The March SP-TE-7K-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March SP-TE-7K-MD is suitable for your application, please contact March Pump.
