| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 53 GPM | 200 LPM |
| Max Head | 52 FT | 15.8 M |
| Power | 1 HP | 0.746 KW |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 47.5 GPM | 180 LPM |
| Max Head | 36.1 FT | 11 M |
| Power | 1 HP | 0.746 KW |
Electrical/Air: 1Ph 115/208/230V 60Hz & 110/220V 50Hz or 3Ph 230/460V 50/60Hz, or 3Ph 575V 60Hz
Inlet: 1-1/2″MPT
Outlet: 1″MPT
Capable of a Maximum Suction Lift of 16 Feet
- Wet End: Polypropylene (Housings, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
- Additional Motor Options: Available in Explosion Proof or Washdown
- Max Internal Pressure: 40 PSI / 2.7 bar
- Max Liquid Temperature: 180 °F / 82 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March SP-TE-7-MD Curve 60Hz (opens in new tab)
- March SP-TE-7-MD Curve 50Hz (opens in new tab)
- March SP-TE-7-MD Self Priming Pump Manual (opens in new tab)
- March Pump Self Priming General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0155-0187-0100 | SP-TE-7P-MD 1 Phase 1HP | Standard |
| The below have an extender on the housing container and separate motor base | ||
| 0155-0330-0100 | SP-TE-7P-MD 1 Phase 1HP | Standard |
| 0155-0330-0200 | SP-TE-7P-MD 3 Phase 1HP | Standard |
| 0155-0330-0300 | SP-TE-7P-MD 1 Phase Explosion Proof 1HP | Standard |
| 0155-0330-0400 | SP-TE-7P-MD 3 Phase Explosion Proof 1HP | Standard |
| The below are modified SP-TE-7P-MD’s |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0155-0330-0100 | 1 | SP-TE-7P-MD, 1 Phase, Complete Standard Pump with Item 17 (Motor Base) | |
| 0155-0330-0200 | 1 | SP-TE-7P-MD, 3 Phase, Complete Standard Pump with Item 17 (Motor Base) | |
| 0155-0187-0100 | 1 | SP-TE-7P-MD, 1 Phase, Complete Standard Pump | |
| 0155-0187-0200 | 1 | SP-TE-7P-MD, 3 Phase, Complete Standard Pump | |
| 1 | 0155-0328-0100 | 1 | Housing Container with Base Stud Extender (Polypropylene) (Must be used with Item 16 or 18) |
| 1 | 0155-0177-1000 | 1 | Housing Container (Polypropylene) (Must be used with Item 19 or 20) |
| 2 | 0155-0182-1000 | 2 | Drain & Filler Cap (Polypropylene) |
| 3 | 0155-0179-1000 | 1 | 1/8″ CS x 2″ OD “O” Ring (Viton) |
| 4 | 0155-0183-1000 | 1 | V-Retainer Clamp (Stainless) |
| 5 | 0155-0175-1000 | 1 | Front Housing (Polypropylene) |
| 6 | 0155-0180-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (Viton) |
| 7 | 0155-0009-1000 | 1 | Thrust Washer (Ceramic) |
| 8 | 0155-0039-1000 | 1 | Shaft (Ceramic) |
| 9 | 0155-0159-0200 | 1 | Impeller with Carbon Bushing (Polypropylene) |
| 10 | 0155-0181-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (Viton) |
| 11 | 0155-0176-0100 | 1 | Rear Housing with Ceramic Thrust Washer (Polypropylene) |
| 12 | 0155-0178-1000 | 1 | Motor Bracket (Plastic) |
| 13 | 0155-0017-1000 | 4 | 3/8″-16 x 3/4″ Long Screw (Stainless) |
| 14 | 0155-0019-1000 | 4 | 3/8″ ID x 5/8″ OD Washer (Stainless) |
| 15 | 0155-0130-0200 | 1 | Drive Magnet |
| 16 | 0155-0173-1000 | 1 | Motor, 1 Phase, 115/230V, 50/60 Hz, 1 HP |
| 17 | 0155-0327-1000 | 1 | Motor Base with Nuts & Washers |
| 18 | 0155-0174-1000 | 1 | Motor, 3 Phase, 230/460V, 50/60 Hz, 1 HP |
| 19 | 0155-0185-1000 | 1 | Motor, 1 Phase, 115/230V, 50/60 Hz, 1 HP |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 3 | 0155-0214-1000 | 1 | 1/8″ CX x 2″ OD “O” Ring (Teflon Encapsulated Viton) |
| 3 | 0155-0273-1000 | 1 | 1/8″ CX x 2″ OD “O” Ring (EPDM) |
| 6 | 0155-0215-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (Teflon Encapsulated Viton) |
| 6 | 0155-0274-1000 | 1 | 1/8″ CS x 4-3/4″ OD “O” Ring (EPDM) |
| 9 | 0155-0159-0300 | 1 | Impeller with Ceramic Bushing (Polypropylene) |
| 9 | 0155-0159-0400 | 1 | Impeller with Mica Teflon Bushing (Polypropylene) |
| 9 | 0155-0159-0500 | 1 | Impeller with Ryton/Teflon/Carbon Bushing (Polypropylene) |
| 10 | 0155-0219-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (Aflas) |
| 10 | 0155-0275-1000 | 1 | 3/16″ CS x 9-7/8″ OD “O” Ring (EPDM) |
| 0155-0059-1000 | 1 | Motor, Explosion Proof, 1 Phase (Contact March For Additional Specs) | |
| 0155-0060-1000 | 1 | Motor, Explosion Proof, 3 Phase (Contact March For Additional Specs) | |
| 1 | Motor, Washdown, 1 Phase (Contact March For Additional Specs) | ||
| 1 | Motor, Washdown, 3 Phase (Contact March for Additional Specs) | ||
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
- Dimensional Drawing SP-TE-7P-MD 1 Phase (opens in new tab)
- Dimensional Drawing SP-TE-7P-MD 3 Phase (opens in new tab)
- Dimensional Drawing SP-TE-7P-MD 1 Phase with Extender on Housing and Motor Base (opens in new tab)
- Dimensional Drawing SP-TE-7P-MD 3 Phase with Extender on Housing and Motor Base (opens in new tab)
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
Motors used with Separate Base Assembly
0155-0173-1000 Motor
Conduit Box, TEFC, IP55
60Hz: 1Ph 1 HP / 0.75 kW, 115-208/230V, 12.6-6.3/6.2 AMPS, 3450 RPM
50Hz: 1Ph 1 HP / 0.75 kW, 110/220V, 14.3/7.1 AMPS, 2850 RPM
0155-0174-1000 Motor
Conduit Box, TEFC, IP55, VFD Capable
60Hz: 3Ph 1HP / 0.75 kW, 208-230/460V, 3.3-3.1/1.5 AMPS, 3450 RPM
50Hz: 3Ph 1HP / 0.75 kW, 190/380V, 3.3/1.7 AMPS, 2850 RPM (Usable at 220/415V)
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the SP-TE-7P-MD Magnetic Drive Self Priming Pump include chemical recirculation, chemical transfer, and scrubber systems. They are ideal for non ported tanks and siphon feed tanks.
Great for Chemicals Including
The SP-TE-7P-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The SP-TE-7P-MD may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the SP-TE-7P-MD. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial SP-TE-7P-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 53 Feet (23PSI). When the SP-TE-7P-MD is fully primed, it is capable of having a suction lift of 16 feet in 120 seconds with maximum impeller diameter. The maximum lift or equivalent is 21 feet. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch male pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 50/60 hertz 230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 40PSI, and the maximum liquid temperature is 180 Fahrenheit or 82 Celsius. The March SP-TE-7P-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March SP-TE-7P-MD is suitable for your application, please contact March Pump.
