Electrical/Air: 62PSI and 130CFM
| System | US | Metric |
| Max Flow | 68 GPM | 257 LPM |
| Max Head | 65 FT | 19.8 M |
| Power | 5 HP | 3.72 KW |
Inlet: 2″MPT
Outlet: 1-1/2″MPT
- Wet End: Natural Kynar (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
- Max Internal Pressure: 60 PSI / 4.1 bar
- Max Liquid Temperature: 190 °F / 87°C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March TE-7.5-MD-AM Curve (öffnet in neuem Tab)
- Manual for 2AM and 8AM Air Motor (öffnet in neuem Tab)
- March Pump General Installation Guide (öffnet in neuem Tab)
- March Safety Instructions and Preventive Maintenance Guide (öffnet in neuem Tab)
Part Numbers
0156-0120-0100, TE-7.5K-MD-AM
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 4 | 0156-0023-1000 | 1 | 0.157” CS x 6.457” ID “O” Ring (Teflon Encapsulated Viton) |
| 4 | 0156-0034-1000 | 1 | 0.157” CS x 6.457” ID “O” Ring (EPDM) |
| 5 | 0156-0037-1000 | 2 | Front & Rear Thrust Washer (Silicon Carbide) |
| 6 | 0156-0036-1000 | 1 | Shaft (Silicon Carbide) |
| 6 | 0156-0043-1000 | 1 | Shaft, 3 Flats (Ceramic) |
| 7 | 0156-0004-0300 | 1 | Impeller with Mica Teflon Bushings (Natural Kynar) |
| 7 | 0156-0004-0500 | 1 | Impeller with Silicon Carbide Bushings (Natural Kynar) |
| 7 | 0156-0004-0600 | 1 | Impeller with Ryton Bushings (Natural Kynar) |
| 10 | 0156-0041-1000 | 1 | Motor Bracket (Plastic) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0157-0152-1000 Motor
5HP/3.72kW, 62 PSI and 130 CFM, 1/2″BSP Air Connection
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the TE-7.5K-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
Great for Chemicals Including
The TE-7.5K-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-7K-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-7.5K-MD-AM. Chemical Resistance Chart (öffnet in neuem Tab)
March Pump’s industrial TE-7.5K-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 68 gallons per minute at 20 feet, and its maximum head is 65 Feet (28 PSI). The standard wet end (the materials that come into contact with the solution) is composed of Natural Kynar, Viton, Carbon, and Ceramic. The inlet connection is 2 inch female pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a Compressed Air Motor which may require 62 PSI and 130 CFM. The maximum internal pressure the pump can tolerate is 60 PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5K-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5K-MD-AM is suitable for your application, please contact March Pump.
