| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 14.5 GPM | 54.9 LPM |
| Max Head | 27 FT | 8.2 M |
| Power | 0.125 HP | 0.093 KW |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 14.5 GPM | 54.8 LPM |
| Max Head | 19.6 FT | 6 M |
| Power | 0.125 HP | 0.093 KW |
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 1″FPT
Outlet: 1/2″MPT
Submersible: Yes
- Wet End: Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet
- Uses: Submersible only
- When submerged, the following is also in contact with the solution: Epoxy, Stainless Steel, Noryl, Cord
- Max Internal Pressure: 50 PSI / 3.4 bar
- Max Liquid Temperature: 130 °F / 54 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March 5C-MD and LC-5C-MD Pump Curve (opens in new tab)
- March 5C-MD and LC-5C-MD Pump Manual (opens in new tab)
- March Pump General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0150-0004-0200 | 5C-MD 115V | Standard |
| 0150-0004-0400 | 5C-MD 230V | Standard |
| The below are modified 5C-MD’s | ||
| 0150-0004-0230 | 5C-MD 115V | Carbon Bushing |
| 0150-0004-0430 | 5C-MD 230V | Carbon Bushing |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0150-0004-0200 | 1 | 5C-MD, 1 Phase, 115V, Complete Standard Pump, | |
| 0150-0004-0400 | 1 | 5C-MD, 1 Phase, 230V, Complete Standard Pump | |
| 1 | 0150-0021-1000 | 7 | #8-32 x 1-3/4” Lg. Screw (Stainless) |
| 2 | 0150-0032-1000 | 1 | Cover with 1” FPT Inlet (Polypropylene) |
| 3 | 0750-0987-1000 | 1 | 0.078” CS x 2.834” ID “O” Ring (Buna N) |
| 4 | 0130-0028-1000 | 1 | Thrust Washer (Ceramic) |
| 5 | 0130-0024-1000 | 1 | Shaft (Ceramic) |
| 6 | 0150-0030-0100 | 1 | Impeller with Bare Ceramic Magnet (Polypropylene) |
| 7 | 0150-0031-0100 | 1 | Rear Housing with 1/2″ MPT Outlet & Ceramic Thrust Washer (Polypropylene) |
| 8 | 0150-0020-1000 | 1 | Quad “O” Ring for Bracket |
| 9 | Not Available | N/A | Epoxy Motor Assembly |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 5 | 0939-0003-1000 | 1 | Shaft (316SS) |
| 6 | 0150-0030-0700 | 1 | Impeller with Bare Ceramic Magnet and Carbon Bushing (Polypropylene) |
| 6 | 0150-0098-0200 | 1 | Encapsulated Impeller (Polypropylene) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
115V Motor
6 Foot Cord and Plug, Submersible
60Hz: 1Ph 0.125HP/0.093kW, 1.6AMPS, 3450 RPM
50Hz: 1Ph 0.125HP/0.093kW, 1.2AMPS, 2850 RPM
230V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.125HP/0.0093kW, 0.9AMPS, 3450 RPM
50Hz: 1Ph 0.125HP/0.0093kW, 0.5AMPS, 2850 RPM
Please contact us for alternative motor data
Perfect for Applications Including
The most common applications for the 5C-MD Magnetic Drive Pump is fountains.
Great for Chemicals Including
The 5C-MD has pumped Fresh Water and Salt Water. The 5C-MD may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 5C-MD. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial 5C-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 15 gallons per minute at 2 feet, and its maximum head is 27 Feet (11PSI). The 5C-MD pump must be submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Stainless Steel, Noryl, and the Cord are also in contact with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March 5C-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 5C-MD is suitable for your application, please contact March Pump.
