| System | US | Metric |
| Max Flow | 2.7 GPM | 11 LPM |
| Max Head | 10.6 FT | 3.3 M |
| Power | 0.006 HP | 0.004 KW |
Electrical/Air: 24V (Voltage Range 0-26)
Inlet: 3/8″FPT
Outlet: 3/8″OD
Submersible: Yes
- Wet End: Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet
- Uses: Must be submerged
- When submerged, the following is also in contact with the solution: Epoxy, Delrin, Motor Leads
- Max Internal Pressure: 50 PSI / 3.4 bar
- Max Liquid Temperature: 120 °F / 49 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March 893 Curve
- 893 Pump Manual (opens in new tab)
- March Pump General Installation Guide (opens in new tab)
- March Safety Instructions and Preventive Maintenance Guide (opens in new tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0893-0001-0600 | 893-06 | Standard |
| The below are modified 893-06’s | ||
| 0893-0001-0661 | 893-06 | Polypropylene Encapsulated Impeller and Teflon O-Ring |
| 0893-0001-0662 | 893-06 | Polypropylene Encapsulated Impeller and EPDM O-Ring |
| 0893-0001-0663 | 893-06 | Polypropylene Encapsulated Impeller and Viton O-Ring |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0893-0001-0600 | 1 | 893-06 Complete Standard Pump | |
| 1 | 0115-0062-1000 | 4 | #7-19 x 1-7/16″ Long Self Tapping Screw (Stainless) |
| 2 | 0893-0004-1000 | 1 | Cover with 3/8″ FPT Inlet (Noryl) |
| 3 | 0115-0018-1000 | 2 | 1/16″ CS x 1-7/16″ OD O-Ring (Buna N) |
| 4 | 0115-0008-0100 | 1 | Impeller (Nylon/Ceramic Magnet) |
| 5 | 0115-0032-1000 | 1 | Shaft (316 Stainless Steel) |
| 6 | 0115-0033-1000 | 1 | Rear Thrust Washer (Carbon/Teflon) |
| 7 | 0893-0003-1000 | 1 | Rear Housing with 3/8″ OD Outlet (Noryl) |
| 8 | 0115-0101-0100 | 1 | Drive Magnet |
| 9 | Not Available | N/A | Encapsulated 24V DC Brush Motor |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 3 | 0115-0061-1000 | 2 | 1/16″ CS x 1-7/16″ OD O-Ring (Viton) |
| 3 | 0115-0069-1000 | 2 | 1/16″ CS x 1-7/16″ OD O-Ring (Teflon) |
| 3 | 0750-0146-1000 | 2 | 1/16″ CS x 1-7/16″ OD O-Ring (EPDM) |
| 4 | 0115-0119-1000 | 1 | Impeller (Polypropylene) |
| 5 | 0115-0042-1000 | 1 | Shaft (Ceramic) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Series 1-MD (opens in new tab) Wet Ends may be used on Series 893
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
20″ Leads, Submersible
24V, 0.5 AMPS, 4000 RPM, 0.006 HP / 0.004 kW
Voltage Range 0-26V
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the 893-06 Magnetic Drive Pump includes marine equipment and fountains.
Great for Chemicals Including
The 893-06 has pumped many chemicals. The 893-06 may have been modified to handle certain chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 893-06. Chemical Resistance Chart (opens in new tab)
March Pump’s industrial 893-06 is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as marine equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (4.5PSI). The 893-06 must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread, and the outlet is 3/8 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 24 Volts. The 24 Volt Motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 160 Fahrenheit or 71 Celsius. The March 893-06 centrifugal magnetic drive pump is capable of handling mild corrosive chemicals, acids, and solvents. To determine if the March 893-06 is suitable for your application, please contact March Pump.
