| Unit | 60Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 30 GPM | 114 LPM |
| Max Head | 41 FT | 12.5 M |
| Power | 0.2 HP | 0.149 KW |
| Unit | 50Hz | |
|---|---|---|
| System | US | Metric |
| Max Flow | 27 GPM | 102 LPM |
| Max Head | 29.5 FT | 9 M |
| Power | 0.2 HP | 0.149 KW |
Electrical/Air: 1Ph 115/230V 50/60Hz
Inlet: 1″FPT
Outlet: 3/4″MPT
- Wet End: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
- Max Internal Pressure: 50 PSI / 3.4 bar
- Max Liquid Temperature: 190 °F / 87 °C
- Note: Product image may be different than actual product received.
Pump Curves & General Installation Sheets
- March TE-5.5C-MD-AC and TE-5.5K-MD-AC Pump Curve (öffnet in neuem Tab)
- March Series TE-5.5 Air Cooled Pump Manual (öffnet in neuem Tab)
- March Pump General Installation Guide (öffnet in neuem Tab)
- March Safety Instructions and Preventive Maintenance Guide (öffnet in neuem Tab)
Part Numbers
| P/N | Pump Description | Modified With |
|---|---|---|
| 0151-0027-0200 | TE-5.5C-MD-AC 1 Phase | Standard |
| The below are modified TE-5.5C-MD-AC’s | ||
| 0151-0027-0212 | TE-5.5C-MD-AC 1 Phase | Teflon O-Ring |
Parts Breakdown
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 0151-0027-0200 | 1 | TE-5.5C-MD-AC Complete Standard Pump | |
| 1 | 0135-0180-1000 | 8 | #10-32 x 1” Long Screw (Stainless) |
| 2 | 0151-0027-1000 | 1 | Front Housing with 1” FPT Inlet & 3/4″ MPT Outlet (Polypropylene) |
| 3 | 0153-0015-1000 | 1 | 3/32″ CS x 4-7/16” ID “O” Ring (Viton) |
| 4 | 0155-0009-1000 | 1 | Thrust Washer (Ceramic) |
| 5 | 0153-0007-1000 | 1 | Shaft (Ceramic) |
| 6 | 0151-0029-0500 | 1 | Impeller (Polypropylene) |
| 7 | 0151-0028-0100 | 1 | Rear Housing with Ceramic Thrust Washer (Polypropylene) |
| 8 | 0151-0061-0200 | 1 | Drive Magnet |
| 9 | 0410-0039-1000 | 4 | #8-32 Hex Nut (Brass |
| 10 | 0620-0010-1000 | 4 | #8 Lock Washer (Stainless) |
| 11 | 0151-0041-0100 | 1 | Motor Bracket (Plastic) |
| 12 | 0175-0087-1000 | 1 | Motor, Air Cooled, 1 Phase, 115/230V, 50/60 Hz |
| WEK | 0151-0069-0100 | 1 | Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7) |
Options
| Item | Part Number | Qty | Description |
|---|---|---|---|
| 3 | 0153-0025-1000 | 1 | 3/32″ CS x 4-7/16” ID “O” Ring (Viton) |
| 3 | 0153-0107-1000 | 1 | 3/32″ CS x 4-7/16″ ID “O” Ring (Teflon) |
| 6 | 0151-0029-0800 | 1 | Impeller with Carbon Bushing (Polypropylene) |
| 6 | 0151-0029-1300 | 1 | Impeller with Mica Teflon Bushing (Polypropylene) |
| 0750-1011-1000 | 1 | Stainless Steel Tag w/Customer’s Desired Information (Not Shown) |
Dimensional Drawings
Please Contact us for 3D drawings and drawings of pumps with alternative motors.
Motor Information
0175-0087-1000 Motor
Conduit Box, IP22
60Hz: 1Ph 0.2 HP / 0.15 kW, 115/230V, 2.7/1.46 AMPS, 3450 RPM
50Hz: 1Ph 0.2 HP / 0.15 kW, 115/230V, 2.9/1.48 AMPS, 2850 RPM
Please contact us for alternative motor data
Perfect for Applications Including
Applications for the TE-5.5C-MD-AC Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-5.5C-MD-AC has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-5.5C-MD-AC may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-5.5C-MD-AC. Chemical Resistance Chart (öffnet in neuem Tab)
March Pump’s industrial TE-5.5C-MD-AC is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V 0.2 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD-AC centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-5.5C-MD-AC is suitable for your application, please contact March Pump.
